Model comparison
Identify the eufy T8300, T8301, T8302, T8312, T8321 and T8360 references
These earlier eufy monitor references can look similar in a second-hand listing, but the display, connection plan, package evidence and source certainty differ. Read the label on the camera and parent unit, then compare the exact included mounts and camera count. The part number alone does not confirm a seller’s bundle contents or current U.S. availability.
| Model | Camera movement and view | Original package distinction | Parent-battery claim |
|---|---|---|---|
| SpaceView T8300 | Motorized pan/tilt; supplied wide-angle lens. Official sources disagree on the standard-lens angle. | U.S. manual lists one camera, wall mount, screws and wide-angle lens. | 2900mAh; up to 8 hours display-on and 15 hours default sleep in support specs. |
| SpaceView S T8301 | Motorized pan/tilt; the exact overview lists regular and wide lens options. Standard-angle figures vary between official sources. | Overview lists a crib mount in addition to wall mounting; the PDF linked from the support record identifies T8300 parts, so verify the mount on an existing kit. | 2900mAh; up to 8 hours display-on and 15 hours default sleep in support specs. |
| Video Baby Monitor 2 Cam kit T8302 | Comparison table lists pan/tilt and standard/wide views; T8302-specific control instructions were not located. | Official support comparison names a 2 Cam kit and the exact column rendering shows two cameras with a parent monitor. No T8302 box checklist or simultaneous-view mode is established. | 2900mAh; up to 8 hours display-on and 15 hours default sleep in support specs. |
| SpaceView Pro T8312 | Manufacturer introduction lists pan 330°/tilt 110° and 1.5×/2× zoom. Its 60° view figure conflicts with the comparison table’s 50°; the linked PDF does not identify T8312 controls. | T8312 introduction lists one camera, one monitor and a wall mount; it says the camera must stay plugged in and can pair with up to three additional cameras. The linked “SpaceView Pro” PDF instead identifies T8321-M/T8301-C parts and reverses the adapter ratings, so do not use it as the exact T8312 manual. | 5200mAh non-replaceable monitor battery; up to 12 hours display-on and 30 hours default sleep, manufacturer claims. |
| 720P Video Baby Monitor T8321 | Fixed-view 80-degree camera, manually aimed; no remote pan/tilt. | U.S. manual identifies T8321-M and T8321-C and lists one camera, one parent monitor and a wall mount. | 5200mAh; up to 12 hours display-on and 30 hours default sleep in support specs. |
| Baby Monitor 2 T8360 | One 2K Wi-Fi camera; 120° field of view, app pan/tilt, 4× zoom and night vision. App shows one camera at a time. | The exact U.S. support list names one camera, one 32GB card, wall/crib mounts and a 5V/2A supply. No handheld display is included; exact current retail availability is unverified. | No parent screen or camera battery; camera must remain plugged in. |
Do not assume every family connection mode is the same
The T8300, T8301, T8312 and T8321 support material describes a parent-screen system without Wi-Fi app viewing. The T8312 introduction explicitly says Wi-Fi capable: no, but its linked manual PDF identifies different monitor/camera model numbers and cannot settle T8312 controls or setup. The T8302 comparison confirms a five-inch parent screen and a two-camera kit, but its exact connection and feed-selection mode are not established by the T8302-specific material reviewed here. Do not assume T8302 is offline-only, app-connected, or split-screen from neighboring family entries. The T8300 and T8301 setup sources describe switching or cycling among added cameras; the T8321 manual describes the same behavior and supports up to four total. Those instructions are not used to fill T8302’s unknown mode. T8321’s exact manual lists one camera; T8300’s manual does too, while T8301’s exact overview lists one camera. The linked T8301 PDF has a T8300 model/box mismatch, so inspect an existing kit rather than assuming these packages are interchangeable.
T8360 is a different, phone-first system
The Baby Monitor 2 is not another SpaceView receiver package. Its exact U.S. support record identifies T8360, includes one camera and a 32GB Class-10 card, and directs setup through an app on 2.4GHz Wi-Fi. It has no parent screen and must remain plugged into mains. Eufy’s FAQ says away-from-home live viewing needs both the camera’s home Wi-Fi connection and the phone’s internet; it also limits live view to one camera at a time and says the stream stops after five minutes. It supports app pan/tilt and local card recording, but not continuous 24/7 recording. The app has been called eufyCare, eufy Baby and Anker eufy across eufy’s own pages, so verify current app support before considering used stock. Its current U.S. listing is not verified and it remains reference-only.
If a dedicated receiver should keep working without Wi-Fi, compare a separately reviewed local-screen system instead. The current Eufy C10 and Eufy E21 are hybrid designs with local screens and phone options, but their supplied cameras and power plans differ. For two rooms at once, select a kit whose exact guide confirms split-screen rather than adding a T8360 camera and assuming the app will show both together. The T8360’s manual also gives its own cord and crib-mount cautions; do not transfer mounting instructions from a similar-looking SpaceView model.
Why the T8321 may suit a different room
The T8321 trades remote camera steering for a manually aimed fixed view and a higher-capacity parent monitor battery claim than the T8300/T8301 family pages list. Its fixed 80-degree view may be adequate when one camera can remain aimed at the intended area; it cannot be repositioned from the receiver. The T8300 and T8301 offer motorized pan/tilt, which is useful if remote aiming matters, but their exact lens-angle details conflict across official pages. T8302 lists pan and tilt but not its control method. T8312 also lists pan and tilt but its comparison and product introduction disagree on the field-of-view figure, and the linked manual identifies other model parts. None of these descriptions is a measured range or runtime guarantee.
Check the adapters before replacing a missing part
For T8321, the overview and exact U.S. manual reverse which unit is listed with a 5V/1A versus 5V/2A adapter. For T8312, the introduction gives the camera 5V/2A and monitor 5V/1A, but the linked PDF identifies T8321-M/T8301-C parts and reverses those values. Use the labels and exact matching manual for the device in hand; do not infer a substitute from family resemblance. The T8321 manual also gives cord-safety directions for its identified system; do not assume the mismatched PDF supplies T8312 installation details. All five models are retained here as references for owners and identification, not current U.S. purchase recommendations. For current options, compare the eufy E21, the T8312 owner/model reference, or another reviewed current product against your requirements.
Sources: eufy T8300 support, T8301 support, T8321 support, the T8312 introduction, its linked manual record, the official model comparison, the T8360 product introduction, its exact support record, FAQ and U.S. guide.